Woca Invisible Oil Primer

Woca Invisible Oil Primer,

Woca Invisible Oil Primer is a water-based product, suitable as a primer for untreated or freshly sanded wooden surfaces indoors. It is designed as a preparatory layer for Woca Invisible Oil.

• Contents 2.5 liters

Result
Invisible Primer & Oil is a water-based oil system that preserves the appearance of freshly sanded wood. Invisible Primer is always applied as the first layer, followed by a layer of Invisible Oil. The system is particularly suitable for light wood types.

Instructions

Invisible Primer
Apply Invisible Primer with the short-haired paint roller below (item: 10905 ), on a maximum of 20 m² at a time. Let the primer soak in for 5 minutes. Rub the primer into the wood until the floor appears saturated. Use a single-disc polishing machine with a beige or burgundy pad (see below). Replace the pad regularly to prevent the primer from clumping.

Remove excess Primer with dry, lint-free cotton cloths (see below) until the surface no longer appears wet and allow the floor to dry for at least 3-4 hours.

Invisible Oil
Intermediate sanding with a burgundy SPP pad (see below) and vacuum thoroughly.

Apply a thin, even layer of Invisible Oil with the same special roller (item: 10905 ) Always treat small surfaces of max. 10 m2 or less. Wait max. 5 minutes until the oil has been absorbed.

Rub the surface with a single-disc polisher and beige/red pad (see below) until the oil is completely rubbed into the wood (replace the pad when necessary to prevent build-ups). Remove excess oil from the surface with a cotton cloth (see below). Treat the entire surface in this way until the wood looks evenly saturated.

Professional TIP: If the primer or oil dries too quickly, for example due to high temperatures or low humidity, both products can be made easier to work with by adding extra product.

The next day the surface can be carefully used; After 7 days the oil is completely hardened under normal indoor conditions. Avoid contact with water before this time. After hardening, the wooden surface can be treated with Invisible Oil Care for extra protection or cleaned with the Eco Multi Cleaner and the Woca Natural Soap approximately 6 times a year.

Post-treatment
For extra protection in high-traffic areas, we recommend treating the floor again with Invisible Oil Care after a week

Cleaning and maintenance
Normal mopping every week with the Eco Multi Cleaner
+/- 6x per year maintenance with Natural Soap (white or natural),
Annual major maintenance with Invisible Oil Care (you can easily order all of this here)

Consumption (depending on wood type):

• Invisible Primer 8-10 m2/L
• Invisible Oil 20-30 m2/L

Packaging: 2.5 litres
Safety data sheet available on request.

TECHNICAL INFORMATION