Woca Invisible Oil

Woca Invisible Oil,

Result
Invisible Primer & Oil is a water-based oil system that preserves the appearance of freshly sanded wood. Invisible Primer is always applied as the first layer, followed by a layer of Invisible Oil. The system is particularly suitable for light wood types.

Instructions for use Woca Invisible Primer,

Woca Invisible Primer Apply Invisible Primer with the short-haired paint roller below (article: 10905 ), on a maximum of 20 m² at a time. Allow the primer to soak in for 5 minutes. Rub the primer into the wood until the floor appears saturated. Use a single-disc scrubbing machine with a beige or burgundy pad (see below). Replace the pad regularly to prevent the primer from clumping.

Remove excess Primer with dry, lint-free cotton cloths (see below) until the surface no longer appears wet and allow the floor to dry for at least 3-4 hours.

How to apply Woca Invisible Oil,
Intermediate sanding with a burgundy SPP pad (see below) and vacuum thoroughly.

Apply a thin, even layer of Woca Invisible Oil with the same special roller (article: 10905 ) Always treat small surfaces of max. 10 m2 or less. Wait max. 5 minutes until the oil is absorbed.

Using a single disc buffing machine and a beige/red pad (see below), buff the surface until the oil is fully rubbed into the wood (replace the pad as needed to prevent build-up). Remove any excess oil from the surface with a cotton cloth (see below). Work the entire surface in this manner until the wood appears evenly saturated.

Professional TIP: If the primer or oil dries too quickly, for example due to high temperatures or low humidity, both products can be made easier to use again by adding extra product.

The next day the surface can be used carefully; after 7 days the oil is fully hardened under normal indoor conditions. Before that time avoid contact with water. After hardening the wooden surface can be treated with Invisible Oil Care for extra protection or cleaned with Eco Multi Cleaner and Woca Natural Soap about 6 times a year

After-treatment Woca Invisible Oil,
For extra protection in busy areas, we recommend treating the floor with Invisible Oil Care once more after a week.

Cleaning and maintenance Woca Invisible Oil,
Weekly normal mopping with the Eco Multi Cleaner
+/- 6x per year maintenance with natural soap (white or natural),
Annual major maintenance with Invisible Oil Care (you can easily order all of this here)

Consumption (depending on wood type):

• Invisible Primer 8-10 m2/L
• Invisible Oil 20-30 m2/L

Packaging: 2.5 liters
Safety data sheet available on request.

TECHNICAL INFORMATION