Woca Master Color Oil (Natural), (formerly Masteroil),

Suitable for all untreated (sanded) types of wood. Deepens the wood color and structure and protects against dirt and stains. Polishing with a polishing machine is preferred. With Master Oil Natural, the WOCA Soap can be applied after a minimum of three days. With Master Oil White this is possible after a minimum of 7 days. An extra treatment with WOCA Soap makes the floor more resistant to moisture, dirt and stains.

Benefits Woca Master Oil,

• For all types of wood and floor types
• Always apply in 2 layers!
• You can opt for a color oil as the 1st layer or just 2 layers of Natural, click here for the colours..
• Very suitable for large floor areas
• Preferably apply by machine
• Suitable for children's toys
• Living biologically recommended
• Packaging: 1, 2.5 or 5 liters.
• Consumption: 8-12 m2/Ltr.
• Drying time: approx. 24 hours.

Woca Color Oil (Colour Oil) gives wooden floors a beautiful natural look. Color oil is available in 12 different colours. The color oil can be applied directly to the untreated wood in 2 layers. The oil colors, penetrates deep into the wood and provides a strong, dirt and water-resistant surface. The oil accentuates the natural wood structure.

Woca Color Oil is color and protection in one product. In combination with pre-treatments such as lyes, many new color options are created. Color Oil enhances the color and structure of the wood. Therefore always do a test first to see if the result on the type of wood to be treated is satisfactory. Woca Master Color Oil is applied in 2 layers.

Wipe the wood beforehand with a cloth in a solution of Woca Intensive Cleaner (1:40 with water). Then let the wood dry well. Apply evenly with a brush or roller and let it soak in for 20 minutes. Rub in with our hand pads or single-disc polishing machine, rub dry with cotton cloths (see everything below or else here for the total range of special polishing pads for Woca oil...)

Polish the treated surface after 6-8 hours with a small amount of Master Color Oil (color or natural, just what you prefer) to fully saturate the wood.

Apply Manually Woca Master Oil,

1. Apply tat with our paint rollers or brushes (see related products below). Apply color oil evenly to a maximum of 5 m2 of floor space. under no circumstances use a cheap hardware store roll or brush, this will not make the result beautiful.
Continue to distribute the oil for 20-25 minutes so that no chapped areas remain and an even, thin layer of shine is created everywhere. Pay extra attention to knots and other highly absorbent areas. Depending on the type of wood, consumption is approximately 1 liter of oil for 10-15 m2.
2. Then scrub the oil into the wood with a green or red pad, until the pores of the wood are saturated and the floor no longer absorbs oil.
3. Now rub the treated surface of the floor thoroughly dry with our cotton cloths (see again below). The floor may be walked on during this work. Always wipe off footsteps immediately.

Cleaning and maintenance Woca Master oil,

1, Annually: apply Woca maintenance oil for protection and nutrition.
2. Monthly / 2 monthly: treat with Woca Natural Soap. Natural soap forms a protective layer on the surface, which reduces wear and stains, etc.
3. weekly or as often as you want: Mopping the floor normally with the Eco Multi Cleaner, this removes all the dirt and keeps the floor wonderfully fresh and clean and prevents damage caused by caked-on dirt, stains, circles, etc.
4. You can easily order these materials here...

- Click here for TECHNICAL INFORMATION Manual application..

- Click here for TECHNICAL INFORMATION Machine application..

--THE BROCHURE--

-TECHNICAL INFORMATION..

-CLICK HERE FOR THE WOCA MAINTENANCE PLAN-