Woca Color oil Extra White no. 118
Article number: | 10827 |
EAN: | 5708055010665 |
- Mo/Fr ordered before 18.00 is shipped directly
- Laagste prijs tot wel 75% korting !
- Houtafwerkingsspecialisten sinds 1976
- Grootste voorraad van de Benelux (+1000m2)
- Reeds 200.000+ tevreden klanten
- Customer service from 10:00 to 18:00
Woca Color Oil Extra White no. 118, (Master Color Oil - WHITE)
Woca Colour Oil gives wooden floors a beautiful natural look. Colour oil is available in 12 different colours. The colour oil can be applied directly to the untreated wood in 2 layers. The oil colours, penetrates deeply into the wood and provides a strong , dirt and water repellent surface. The oil accentuates the natural wood structure.
Colour Oil is colour and protection in one product. In combination with pre-treatments such as lye, many new colour possibilities arise. Colour Oil enhances the colour and structure of the wood. Therefore, always do a test first to see if the result on the type of wood to be treated as desired. Master Colour Oil is applied in 2 layers.
Wipe wood first with a cloth in a solution of Woca Intensive Cleaner (1:40 with water). Then let the wood dry well. Apply evenly with a brush or roller and let it soak in for 20 minutes. Rub in with our hand pads or single-disc scrubbing machine, rub dry with cotton cloths (see below for everything or here for the complete range of special scrub pads for Woca oil...)
After 6-8 hours, polish the treated surface with a small amount of Master Colour Oil (coloured or natural, as desired) to fully saturate the wood.
Consumption: 1 liter per ± 10m²
Drying time: approx. 24 hours
Apply Manually:
1. Apply tat with our paint rollers or brushes (see below for related products) Apply colour oil evenly to a maximum of 5 m2 of floor surface. Never use a cheap DIY store roller or brush, the result will not be nice with this.
Continue to distribute the oil for 20-25 minutes so that no dry spots remain and an even, thin gloss layer is created everywhere. Pay extra attention to knots and other highly absorbent areas. Depending on the type of wood, the consumption is approx. 1 liter of oil for 10-15 m2.
2. Then rub the oil into the wood with a green or red pad until the pores of the wood are saturated and the floor no longer absorbs the oil.
3. Now rub the treated surface of the floor dry with our cotton cloths (see below). The floor may be walked on during this work. Always wipe away footprints immediately.
- 1-See all the colours neatly together here...
- 2-NEW: HERE YOU WILL FIND ALL INSTRUCTION VIDEOS OF ALL WOCA PRODUCTS...
- 3-TECHNICAL INFORMATION..
- 4-BROCHURE..
- -CLICK HERE FOR THE WOCA MAINTENANCE PLAN-
Cleaning and maintenance,
1, Annually: Apply Woca maintenance oil to protect and nourish.
2. Monthly / 2 monthly: treat with Woca Natural Soap. Natural soap forms a protective layer on the surface and that ensures less wear and stains etc.
3. Weekly or as often as you like: Mop the floor normally with the Eco Multi Cleaner, this removes all dirt and keeps the floor nice and fresh and clean and prevents damage from caked-on dirt, stains, rings, etc.
4. You can easily order these materials here...