Thomsit R790 Fill and Primer 14kg
Article number: | 14599 |
EAN: | 4083200301227 |
- Mo/Fr ordered before 18.00 is shipped directly
- Laagste prijs tot wel 75% korting !
- Houtafwerkingsspecialisten sinds 1976
- Grootste voorraad van de Benelux (+1000m2)
- Reeds 200.000+ tevreden klanten
Thomsit R790 Fill and Primer 14kg,
For renovating old floors with many seams, Do not use on sulfite lye and soft bituminous glue. Thomsit R 790 does not seal against moisture.
• Fill and prime seams in one step
• Fast drying
• Fiber Reinforced
• Adjustable consistency
• Especially suitable for wooden floorboards and ceramic tiles
• To be used in combination with Thomsit FA 97 Fiber Reinforced Leveling Compound or Thomsit SL 85 System Leveling Compound
Two-component, polymer-dispersion, special low-emission cement primer that can be used for both seam filling and bonding with Thomsit leveling compounds on absorbent and impervious substrates, such as
• plank floors, chipboard V 100, OSB boards, parquet floors and other wooden substrates with seams
• old, insufficiently sanded mastic asphalt screeds
• stone floors and ceramic tiles
• old coatings
• strongly bonded old CV/PVC floor covering with a relief surface
• cement and calcium sulphate screeds, concrete floors
• magnesium oxide and magnesium oxychloride screeds
• old (above mentioned) substrates with strongly adhering, water-resistant adhesive residues or leveling agents. Do not use this agent on old adhesives based on sulphite lye and soft bitumen adhesive.
Thomsit R 790 offers no protection against moisture.
Thomsit R 790 meets the strictest requirements in terms of occupational safety, indoor air quality and environmental friendliness.
Delivery unit: BUCKET
Ready-to-use: No (2-component)
Consumption: 200-800 g/m2
Suitable for underfloor heating: Yes
Substrate: Anhydrite, Fermacell, Wood, Particle board, Tiles, Sand cement
Processing time (minutes): 40
Drying time: approximately 90 minutes
Brand: Thomsit