Stauf Repamed (For hollow spots)
Article number: | 14236 |
EAN: | 8718074964600 |
- Mo/Fr ordered before 18.00 is shipped directly
- Laagste prijs tot wel 75% korting !
- Houtafwerkingsspecialisten sinds 1976
- Grootste voorraad van de Benelux (+1000m2)
- Reeds 200.000+ tevreden klanten
- Customer service from 10:00 to 18:00
Stauf Repamed (For hollow spots),
Solvent-free, one-component liquid polyurethane adhesive.
This handy injection needle, filled with one-component PU liquid, easily fills hollow spots without breaking out. A practical product: it is ready to use, easy to use and causes minimal damage from the use of an injection needle. It is suitable for underfloor heating, is low-emission and refillable with VPU-155.
Technical info..
A 4 mm. drilling diameter sufficient. To fill in STAUF Repamed, the sprayer is placed perpendicular to the drill hole and the liquid repair agent is sprayed evenly under the parquet with uniform pressure. Repeat accordingly for several drill holes. Immediately remove any material emerging from the drill holes. If a smaller drill diameter is desired, or to spray behind edge finishing/skirts, the supplied needle can be used. The areas to be sprayed must be sufficiently weighted, as the repair agent can foam up slightly when curing and possibly push the parquet upwards. After 24 hours, the straps can be removed and the drill holes sealed with hot wax, wood filler or other appropriate means.
special features,
filling hollow spaces
gluing / repair
- Permitted substrates,
- Concrete C 25 / 30 according to DIN 1045 (rough surface)
- Calcium sulphate (anhydrite) cast floors
- Plank floors
- Chipboard (P4 to P7), OSB (OSB/2 to OSB/4)
- Uncoated plasterboard
- Cement screeds
- Application range,
- for problem-free concealment of cavities or for subsequent gluing of loose parts
- product features,
- permitted with underfloor heating
- ready for use
- good adhesion to various materials
- without solvents