Osmo Buitenhout Opaque wood paint 2104 WHITE (Perfect product for windows and doors!)
| Article number: | 11049 |
| EAN: | 4006850101054 |
- Mo/Fr ordered before 18.00 is shipped directly
- Laagste prijs tot wel 75% korting !
- Houtafwerkingsspecialisten sinds 1976
- Grootste voorraad van de Benelux (+1000m2)
- Reeds 200.000+ tevreden klanten
- Customer service from 10:00 to 18:00
Osmo Wood Paint Opaque 2104,
Professional white paint for windows and doors.
An elegant white opaque glossy wood finish based on natural oils. It is microporous, which allows the wood to breathe and protects it from moisture penetration. Durable, extreme weather and UV resistant. Does not break, peel, flake or blister, high efficiency and very durable, The ideal low-maintenance professional paint for windows, doors, shutters, windows, frames, doors, frames, etc., but also fencing, pergolas and walls, cladding, etc. and can also be used for painting over other paints.
When painting over another Osmo product, sanding is not necessary, nor is a base coat or primer necessary.
Advantages of Osmo Opaque Wood Paint 2104,
- Extremely weather and UV resistant
- Suitable for indoor and outdoor use
- Very water and dirt repellent
- Reduces swelling and shrinkage of wood
- Natural wood grain is hidden
- Microporous, breathable finish that will not crack, chip or flake
- No sanding required for future applications
- Available packaging 0.75 liter and 2.5 liter
- 1 Ltr is sufficient for approximately 20 m2 per layer
Cloths and brushes, rollers etc that have been used should be rinsed with water and kept in a sealed bag or container as there is a risk of self-ignition. Therefore, always rinse everything with water before throwing it away in the trash.
Tip: Always order a little more, because you can easily maintain and update the surface with Osmo Wood Paint Opaque 2104.
Old wood or wood that has not had a finish often absorbs more paint, which means more paint is needed.
- Also available in 25 Ltr, this must be ordered, delivery time +/- 2 weeks.
Tips, Wood surface must be clean, dry and frost-free (moisture content max. 20%).
Osmo Opaque wood paint is ready for use. Do not dilute. Stir well.
Remove old stains. Old layers of paint and/or varnish must be completely removed / sanded. In general, wear a dust mask during sanding operations.
The finished surface is affected by several factors, including the condition of the wood. That is why a test is always necessary, especially when using it for the first time.
If extra protection against blue discolouration, rot and insects is desired, pre-treat the wood on all sides if possible with our Osmo WR 4001 Wood Impregnation.
