Wakol Parquet glue 2k PU 210 (6.9 kilo incl. Hardener)
- Buy 5 for €83,25 each and save 2%
- Buy 15 for €82,40 each and save 3%
- Buy 60 for €80,70 each and save 5%
| Article number: | 10916 |
| EAN: | 8718074770744 |
- Mo/Fr ordered before 18.00 is shipped directly
- Laagste prijs tot wel 75% korting !
- Houtafwerkingsspecialisten sinds 1976
- Grootste voorraad van de Benelux (+1000m2)
- Reeds 200.000+ tevreden klanten
- Customer service from 10:00 to 18:00
Wakol Parquet Glue 2k PU 210 (6.9 kilo incl. Hardener)
2-component polyurethane reaction adhesive without solvents for impact-resistant bonding of 10 mm. Solid, mosaic, high-edge slats and ready-to-use parquet. Can also be used for exotic parquet, end grain and laminate floors on porous and non-porous surfaces.
meets the standards according to DIN 281. price is for 6.9 kilos, so 1 package.
Advantages,
- Suitable for all types of wood
- Very strong and fixative
- Consumption per m2: 800-1200 g
- Packaging: 6 kg / 0.9 kg harder
- Open time 60-90min.
--TECHNICAL INFORMATION--
Polyurethane adhesives are solvent-free parquet adhesives and are used on both absorbent and non-absorbent subfloors. In addition, Wakol's PU adhesives are ideal for gluing pre-painted parquet. The range includes both one- and two-component PU adhesives.
Scope of application,
2-component reaction adhesive according to DIN EN 14 293 for impact-resistant installation of
• 10 mm solid parquet acc. DIN EN 13 227
• Mosaik parquet acc. DIN EN 13 488
• High-edge blades acc. DIN EN 14 761
• Thick strips acc. DIN EN 13 226
• Multi-layer parquet acc. DIN EN 13 489
• Solid parts acc. DIN EN 13 226 and DIN EN 13 990
• Kopshout RE / WE acc. DIN 68 702
• Laminate floors that have been released by the manufacturer for full bonding on absorbent and non-absorbent subfloors indoors
Technical data,
Raw material base: Polyurethane
Mixing ratio: 6.7 parts by weight of component A + 1 parts by weight of component B
Waiting time: none
Application time: approx. 60 - 90 minutes
Pot life: approx. 60 - 70 minutes
Setting time: approx. 24 - 48 hours
Surface treatment: after 24 hours at the earliest
Cleaning agent: WAKOL RT 5960 Cleaning cloths before the adhesive hardens
Shelf life: 12 months at room temperature
Storage temperature: not below +5 °C, sensitive to frost
subfloors,
The substrate as well as the climatic conditions must meet the requirements of the valid standards and data sheets. Subfloors must be permanently dry, form-retaining, flat, free of cracks, contaminants and substances that could impair the bond.
Calcium sulphate bonded floors according to the manufacturer's or supplier's instructions. mechanically pre-treat and vacuum in accordance with the applicable standards and information leaflets.
We recommend always pre-ironing floors with integrated underfloor heating. Observe the drying time of the primer.
Instructions,
Allow the contents of the hardener pack to flow completely into the resin pack and mix both components intensively with a suitable mixer for at least 3 minutes until an even color is obtained and no streaks are visible.
