Lecol OilCare OH22,

Is a water-based maintenance oil, ready for use, solvent-free and soap-free. The product gives an excellent result and retains the matte appearance of oiled floors.
Ideal if you need to maintain oiled floors in whole or in part.

Application Lecol Oil Care OH22

Lecol OilCare OH22 is suitable for parquet and other flooring impregnated with oxidatively drying oil.
wooden floors that can absorb sufficient maintenance oil. Lecol OilCare OH 22 is not suitable
for floors treated with hard wax oil, UV oiled floors or lacquered floors.

Technical data,
Drying time: Passable to Approx. 4-6 hours. Fully loadable after drying overnight.
Material consumption: Approx. 1 liter per 30-100 m2.
Packaging: 1 liter/bottle.
For optimal results, first clean with Lecol Intensive cleaner OH27
Apply with the polishing pads (see below) or a polishing machine
Shelf life: Lecol OilCare OH22 always in the original closed packaging, frost-free above
Store at 5 ºC. Allow the product to acclimatize before processing
Dilute: Do not dilute product, it is ready to use

Instructions for use Lecol Oil Care OH22

1. Firstly, it is important to allow this product to acclimatize in advance. Best processed at room temperature. When you start, it is important to make the entire floor dust-free. For the best result, you should then clean the floor intensively with the Lecol Intensive cleaner OH27 in combination with a polishing machine with a green pad.
2. Once you have done this and the floor is completely dry, you can then apply the Lecol Oil Care thinly and evenly with the special oil cloth from the Opti Set or with the cotton cloths (see below). Level excess material and prevent puddles.
3. You can then rub in the Lecol Oil Care OH22 thoroughly with a beige pad by hand or machine.
4. For the best result, you can apply the maintenance oil using a polishing machine in combination with a beige pad. There is a small circle in the middle of the beige 33cm pad, which you press out. Then place the beige pad on your floor, pour a small puddle of maintenance oil into the round recess of the pad and then place the polishing machine on it. Then you can get started.

On oiled floors that do not absorb oil (hard wax oil, UV oil), the use of Lecol OilCare OH22 can lead to undesirable results. In such a case we recommend using Lecol WaxCare OH39 .

Maintain Lecol Oil Care OH22

You should wait at least 2 days before damp cleaning the floor. You can then maintain the floor weekly by wiping the floor slightly damp with the Eco Multi Cleaner, see below. and then monthly / 2 monthly with the Lecol Soap Natural OH23.

-CLICK HERE FOR THE ONLY CORRECT MAINTENANCE PLAN FOR ALL WAX/OIL FLOORS FROM LECOL/LEHA...

--TECHNICAL INFORMATION--