Wakol MS 290 Polymer Adhesive 18kg

Wakol MS 290 Polymer Adhesive 18kg

The parquet adhesive MS290 is especially suitable for the full bonding of multilayer parquet with a knife / groove connection. Wakol has developed a new adhesive that is especially suitable for this purpose, due to the increasing need to glue multi-layer parquet.

Also available in bucket with foil!

• Consumption per m2: 800-1400 gr
• Packaging: 18 kg Due to the sealed packaging, this adhesive can be kept for 12 months
• EMICODE: EC1 PLUS R

Wakol MS290 offers you the following product benefits:
• The adhesive is based on proven MS technology. This basis guarantees a safe and clean product. This means that no allergic reactions are known and that the adhesive can be easily removed from the hands and pre-treated floors. The adhesive is water and solvent free and therefore complies with Dutch OPS legislation.
• An excellent stability of the adhesive. This means that the glue applied with the correct glue can stay in place, so that sufficient glue can be transferred from the subfloor to the parquet parts.
• High adhesion strength. The parts are, as it were, sucked into the glue. Weakening or blind nailing is advised.
• Can also be applied to our primer / moisture barrier Wakol Express Primer PU280. The Wakol MS290 adhesive can already be glued within 45 minutes after the last applied primer layer.
• Wakol MS290 parquet adhesive can be applied directly to any surface. The subfloor must be sufficiently clean, dry and absolutely dust-free. Eea according to the technical mark sheet.
• Wakol MS290 is supplied in plastic packaging of 18 kg, provided with a foil layer.

In short, with the new Wakol MS290 parquet adhesive you have a perfect product that meets all your requirements for the bonding of multilayer parquet. The Wakol Parquet Adhesive MS260 naturally also continues to exist in our product range. This MS glue can be used more widely and thus a truly all-round product.

--TECHNICAL INFORMATION--