Elastilon Sport 3, 5 or 10mm (price per roll of 25m2),

Elastilon Sport has the density of Elastilon Basic (30 kg/m³) or Elastilon Strong (50 kg/m³), from which it only differs in thickness. It is namely, depending on the wishes of the principal, available in 3, 5 or 10 mm thickness.
Compared to traditional substructures for sports floors, which are very expensive, labour-intensive and very laborious, its great advantage is manifested in the fact that it achieves a completely homogeneous suspension over the entire surface. The fact that this suspension can be perfectly adjusted to the wishes or requirements of the architect, principal or user is the biggest advantage on top of that.
The ballet hall of the University of Tilburg is a very fine example of this. Here the suspension was not determined by the contractor, nor the architect, nor the owner, but by the head ballet teacher.

• 3, 5 or 10 mm
• price per roll of: 25 x 1 = 25 m2

• A perfect solution to an old problem (shrink swelling)
• Virtually emission-free (no pollution of the indoor climate)
• No deformation of the parts (warping) due to 'dry bonding'
• Fast and clean installation method (time saving of 50 to 70%)
• No nails in the wood (which are visible after renovation)
• High living and walking comfort (possibly up to whisper-quiet)
• Depending on the floor type, permitted in apartments and multi-storey buildings (high impact sound reduction possible)
• Continuous elastic tensile stress of the parts towards each other (no seam formation)

PHYSICAL PROPERTIES Elastilon Sport,

PE foam
Quality:Physically cross-linked polyethylene foam
Density: 30 kg/m³
Tensile strength (longitudinal): 0.26 N/mm²
Expansion (longitudinal): 130%
Temperature range:-80°C / +100°C
Thermal conductivity: 0.034 W/mK (at 0°C)
Moisture absorption:< 0.4% (after 7 days) < 0.6% (after 28 days)
Permanent deformation @ 25% compression: 7% (22 hours, 23°C; after 24 hours of unloading)
Compression resistance @ 30% compression: 23 kPa

Resistant to mold and insects
Free from CFCs
adhesive film
Tape thickness: 0.15 mm
Adhesive weight: 80 g/m³
Adhesive strength (N/25 mm): 18 N
Shear strength (25 mm x 25 mm): 500 g/25 mm²

Temperature range
Application: +10°C minimum
Operating temperature: -50°C / +100°C
Short term: +120°C
Aging resistance: very good
Storage: 2 years @ 21°C, 50% relative humidity,
no direct sunlight or strong artificial light