Wakol D 3318 Multiflex glue content 13 kilos

Wakol D3318 Multiflex glue content 13 kilos,

Wakol D3318 Multiflex is a solvent-free fibrous dispersion adhesive based on acrylic dispersion according to DIN EN 14259 for the bonding of,

• homogeneous and heterogeneous PVC floor covering, rolls and tiles
• PVC design floor covering, strips and tiles
• Central heating floor covering
• Linoleum
• Rubber floor covering up to 4 mm thick
• Floor covering, CV floor covering, as well as flexible tiles, linoleum as rubber floor covering up to 3 mm thick on absorbent surfaces in indoor applications, on absorbent surfaces indoors.

Special characteristics

• solvent-free according to the definition from TRGS 610
• suitable for underfloor heating
• according to DIN 14259
• suitable for office chair castors
• optimal impression behaviour
• Very low emission
• Suitable for underfloor heating

--TECHNICAL INFORMATION--

subfloors,
Both the subfloors and the climatic conditions must comply with the standards in accordance with DIN 18365. Subfloors must be absorbent, flat, permanently dry and dimensionally stable.
Furthermore, the subfloors must be free of cracks, contaminants and substances that could impair the adhesion.
Non-absorbent and uneven subfloors must be provided with a layer of Wakol leveling compound.
Observe the technical information for the primer and leveling compound.

Instructions,
Stir the adhesive well before use. Apply evenly to the substrate with a notched trowel, avoiding accumulation of adhesive. After the set waiting time, lay the floor covering in the adhesive bed and press down well.
After a short time, rub or roll well again.
Roll the rubber floor covering again after approx. 1 hour.
Extremely stiff floor coverings should be weighted down on the sides if necessary.