Bona Gap Master (Glue sealant by color in tube)
Brand:
Bona
- Buy 3 for €11,83 each and save 1%
- Buy 12 for €11,59 each and save 3%
- Buy 60 for €11,35 each and save 5%
- Buy 300 for €10,76 each and save 10%
Article number: | 11736 |
EAN: | 9003119003284 |
- Mo/Fr ordered before 18.00 is shipped directly
- Laagste prijs tot wel 75% korting !
- Houtafwerkingsspecialisten sinds 1976
- Grootste voorraad van de Benelux (+1000m2)
- Reeds 200.000+ tevreden klanten
- Customer service from 10:00 to 18:00
Information
Bona Gap Master
Bona Gap Master is a silicone-free joint sealant for parquet based on polyacrylate. The product can be sanded quickly and lacquered with all parquet lacquers. Bona Gap Master is self-adhesive and can also be used as a glue. It is solvent-free, odorless and suitable for all types of parquet. Bona Gap Master is available in 14 different colors (see product description and color chart). It has high and durable elasticity. Expansion: approx. 7%
Properties ,,
- permanently permanently elastic
- solvent-free, isocyanate-free and silicone-free
- odorless
- excellent internal strength + edge bonding
- high initial and final strength
- Can be sanded and painted with all brands of lacquer or oil, hard wax, etc.
- High and durable elasticity
- Available in 14 colours
CHOOSE YOUR COLOR ACCORDING TO THE IMAGE.
1, Beech dark
2, Ash / Pine
3, Oak dark
4, WHITE
5, Maple
6, Beech light
7, Oak light
8, Cherries
9, Wenge
10, Nuts
11, teak
12, Red Exotic
13, Gray RAL7030
14, Black
15, Oak Smoked
Instructions for use ,
1. Cut off the convex cap on the tube with a sharp knife - make sure the
threads are not damaged. Screw on the nozzle, cut it diagonally
adjust the size and shape to the joint.
2. Apply a continuous bead, making sure it touches both sides of the joint.
3. Smooth immediately with flat edge, sponge or wet finger.
4. Any used tape can be removed immediately after applying the sealant.
1. Cut off the convex cap on the tube with a sharp knife - make sure the
threads are not damaged. Screw on the nozzle, cut it diagonally
adjust the size and shape to the joint.
2. Apply a continuous bead, making sure it touches both sides of the joint.
3. Smooth immediately with flat edge, sponge or wet finger.
4. Any used tape can be removed immediately after applying the sealant.
Bona Gap Master must be protected from moisture, e.g. condensation, until a firm film has formed. Freshly applied material may be removed with a damp cloth. Clean tools with water immediately after use. Cured material must be removed mechanically. Residual residues can be softened with water and then wiped off. The color will change slightly during drying.