Wakol Parquet glue 2k PU216 (6.9 kilo incl. Hardener)

Wakol Parquet Glue 2k PU 216 (6.9 kilo incl. Hardener)

2-component polyurethane brown reaction adhesive without solvents for impact-resistant bonding of 10 mm. Solid, mosaic, high-edge slats and ready-to-use parquet. Can also be used for exotic parquet, end grain and laminate floors on porous and non-porous surfaces. meets the standards according to DIN 281. price is for 6.9 kilos, so 1 package. Also available in 11 kg packaging, please call or email.

• Consumption per m2: 800-1200 g
• Packaging: 6 kg / 0.9 kg harder
• Open time approx. 70 min.

--TECHNICAL INFORMATION--

subfloors,
Both the subfloors and the climatic conditions must comply with the standards according to DIN 18365. Subfloors must be flat, permanently dry and retain their shape.
Furthermore, the subfloors must be free of cracks, contaminants and substances that could impair the adhesion. Anhydrite subfloors acc. mechanically pre-treat and vacuum in accordance with the manufacturer's instructions and the applicable standards and data sheets.
We recommend pre-ironing subfloors with integrated underfloor heating. Observe the drying time of the primer.

Processing,
Allow the contents of the hardener package to flow completely into the adhesive package and mix both components intensively for at least 3 minutes with a suitable stirrer until a homogeneous color is created and no more streaks are visible.
Then apply the glue evenly with a notched trowel, avoiding glue build-ups. Insert the parquet immediately and press well.
Make sure that enough glue is transferred to the underside of the wood.
The installed parts may not be entered within the first 4 - 6 hours.
Sanding and finishing of the parquet can be carried out after the adhesive has completely set, after 24 hours under standard climatic conditions.
Clean tools immediately after use with WAKOL RT 5960 cleaning cloths. After the adhesive has set, WAKOL PU 216 Parquet Adhesive can only be removed mechanically!

Technical data,
Raw material base: Polyurethane
Mixing ratio 10 parts by weight comp. A + 1.1 part by weight comp. B
Waiting Time: None
Open time: approx. 70 minutes
Pot life: approx. 35 - 40 minutes
Setting time: approx. 24 - 48 hours
Surface treatment: After at least 24 hours
Cleaning: WAKOL RT 5960 Cleaning Wipes before the adhesive sets
Shelf life: 12 months at room temperature
Storage temperature: not below +5 ºC, sensitive to frost
GIS CODE: RU1
EMICODE: EC1 PLUS R