Tisa-Line Parquet spring 14mm W-shape

Parquet spring 14mm W-shape PER PIECE,

Special parquet springs in W-shape of 14 mm are placed between the (floating) floor and the wall.
They keep the floor in tension so that seaming is minimized. The parquet springs are usually placed every 30 to 40 cm only on the long side. The ends of the floorboards must then be glued.

Minimum order 10 pieces.

The innovative parquet spring for floating plank floors! This parquet spring replaces the well-known corks and other flexible methods in the longitudinal direction. Squeeze the spring with the parquet spring pliers and place a spring every 50 cm from the long side of the plank with the wide side of the spring facing the wall.

Advantages of this parquet spring
-Quick and easy to install and remove with the parquet spring pliers
-Prevents floating floors and parquet floors from loosening
-Prevents excessive cracking after shrinkage
-Free sawing easier; the spring can be removed in its entirety
- Damage caused by jamming during free sawing is a thing of the past
-Reusable after removal
-Better pressure distribution on floor and wall

Specifications
Manufactured from high-quality form-retaining stainless steel spring steel, so no rust formation.
Height 14 mm, width 25 mm and length 100 mm when relaxed. Required distance between floor and wall min. 15 mm and max. 20 mm. Consumption depending on the type of wood, 1 per 50 to 60 cm.