Woca Invisible Oil Care

Woca Invisible Care,

You can use Invisible Oil Care for the maintenance of all wooden surfaces finished with Invisible Primer&Oil and Neutral Oil.

Result
Invisible Oil Care refreshes the old oil layer and improves protection.

Instructions for use Woca Invisible Oil Care,

Clean the surface with Intensive Cleaner and wait until it is dry. Temperature of product, room and floor must be between 15°C-30°C. Always ensure good ventilation during application and curing. Shake the bottle well before and during use.

• Apply a small amount of Invisible Oil Care to the wood with our special paint roller which you see below. Always treat small surfaces of max. 20 m2 or less.
• Rub the oil in carefully with our white pads or cotton cloths (see below) for larger surfaces you can use a single disc machine (always use our pads, size is always 16inch). Keep rubbing until the wood looks saturated and the surface is even.
• Remove excess oil from the surface with a cotton cloth. The wooden surface should not look wet and there should be no residual oil left on the surface after rubbing.
• After 6-12 hours you can use the surface carefully; after approx. 3-5 days it is completely hardened. Do not let the surface come into contact with water until it is completely hardened. Always do a test piece to check whether there is a good bond between the surface and the product.

Aftertreatment
Not necessary

Cleaning and maintenance Woca Invisible Oil Care,
1, Mop normally weekly with the Eco Multi Cleaner.
2, Regular maintenance with Woca Natural Soap (white) (+/- 6x per year)
3, Annual major maintenance with Woca Invisible Oil Care

You can find all the above maintenance products here.

Packaging: 1 and 2.5 liters
Consumption: 30-40 m2/l depending on the type of wood.

Safety data sheet available on request.

TECHNICAL INFORMATION