Woca No one Polish Lacquer

Polish No1 for lacquer is suitable for the maintenance of all matte painted surfaces and is specifically designed to extend the life of the coating. No1 polish for varnish strengthens existing paint because it leaves a durable, flexible layer that protects the surface from scratches and heavy load. The special composition also ensures that the surface thanks to the policyholders will retain its matte appearance!

RULES

1. No1 Intensive cleaner with water in a mixing ratio of 1:10. Clean the floor until the surface is completely clean. Rinse with clean water. Allow the surface to dry completely before Polish No1 for applying lacquer.
2. Shake the bottle thoroughly.
3. Transfer the concentrated Polish No1 for lacquer with a well-wrung cloth or mop in a thin layer. If dirty, rinse the cloth or mop in clean water and wring well. Continue with the application. Stop applying No1 Polish Lak when the surface begins to dry up.
4. Allow the floor to dry for reuse about 30 minutes. Additional polishing is not needed.
5. Regular cleaning of the treated, varnished floor can be done with soap for cleaning No1 paint.

always do a test piece in order to determine whether there is good adhesion between the surface and the product. WoodCare Denmark is not responsible for misuse, damage or injury as a result of not properly following the correct application requirements.

Storage: Store safely, out of reach of children. Do not expose to heat (eg. Sunlight). Keep from freezing.
Trash: Empty buses and waste deposit in accordance with local regulations.
VOC: This product contains a maximum of 45 g VOC / L. The threshold value is 140 g VOC / L (cat. A / i).
Consumption: 60 m2 / l.

Safety data sheet available on request.

--TECHNICAL INFORMATION--