Woca No 1 Varnish for Wood and Flooring

No1 Varnish for wood flooring is a superior two-component paint specifically designed for finishing of untreated wooden floors made of light wood. The lacquer is based on the development of a new polyurethane binder and the finish provides a remarkable, unique, and this soft effect in combination with a neutral / invisible finish that feels and looks like untreated wood. A No1 lacquer finish creates a silky, breathable, flexible and self-matte finish wear the lacquered floor reduced in a unique way.

RULES

Preparation:

1. Clean the surface with Cleaner No1. Allow to dry completely the floor.
2. Shake the bottle vigorously.
3. Add the hardener to the paint in a ratio of 50 ml to 2.5 liters of paint. A full cap contains 10 ml. It is very important that the hardener and paint are mixed well. The hardener is added in the bus lacquer and well shaken. Rather stir not only because the product mix than less! Allow the mixture to stand for 10 minutes so that the curing agent can react with the paint.
4. Bring the No1 Varnish for wooden floors with undiluted lacquer roller or brush.
5. The paint is dry after about 90 minutes and is sanded after 12 hours.
6. The surface sanding light (dark red SPP path) and good vacuuming.
7. Apply 2 additional coats No1 Varnish for wooden floors with an intermediate drying time of 2 hours.

Advice: It is important for both the wood and the varnish to have a temperature of at least 20 ° C. Provide adequate ventilation. Replacing furniture at least 24 hours after the last coat. The finished floor is completely wear-and scratch-resistant after about 8 days (replacing carpets / rugs, etc.). always do a test piece in order to determine whether there is good adhesion between the surface and the lacquer.

Composition: 1,2-benzisothiazol-3 (2H) -one. Can evoke an allergic reaction.
Binder: Specially modified polyurethane.
Solvent: Water
Viscosity: Ca. 40 sec. in DIN Cup 4 at 20 ° C (mixed with hardener).
Density: Ca. 1.00 g / ml.
Consumption: Ca. 8-12 m² / liter / layer.
Tools: Brush and lakroller.
Degree of gloss: Mat, less than 3 at an angle of 60 degrees.
Storage: Cool and frost free Keep out of reach of children. Avoid direct sunlight and high temperatures.
Clean tools: Water.
VOC: This product contains a maximum of 35 g VOC / liter. The permissible limit is 140 g VOC / L (cat. A / i).
Trash: Empty buses and waste deposit in accordance with local regulations.

Safety data sheet available on request.

--TECHNICAL INFORMATION--