Bona Supersport Pure HD (Paint for PVC) 5 liters
Brand:
Bona
Article number: | 14670 |
EAN: | 7312791620507 |
- Mo/Fr ordered before 18.00 is shipped directly
- Laagste prijs tot wel 75% korting !
- Houtafwerkingsspecialisten sinds 1976
- Grootste voorraad van de Benelux (+1000m2)
- Reeds 200.000+ tevreden klanten
- Customer service from 10:00 to 18:00
Information
Bona Supersport Pure HD (Paint for PVC) 5 liters,
Bona SuperSport Pure HD is a hard-elastic and wear-resistant PUR coating for the treatment of elastic floors in sports halls. It serves as a long-term surface protection and restores appearance and friction plus simplifies routine maintenance. Bona SuperSport Pure HD has a water-based, clear, non-yellowing formula.
• Strong PUR protection for elastic sports floors
• Fast drying time for minimal site downtime
• Optimal application and leveling properties
• Complies with EN 14904:2006 (Indoor Sports Flooring)
• Recommended by FIBA for competition at the highest level
Instructions:
- Shake the can thoroughly and pour the material into a mixing bucket.
- Slowly add a bottle of Bona R Harder into the bucket while mixing by machine. Mix the mixture thoroughly for at least 1 minute. Note: The mullet must not be added directly into the Bona SuperSport HD can. Only external mixing is possible. When mixing smaller amounts, make sure to maintain the correct ratio between Bona SuperSport Pure HD and Harder. Allow the mixture to react for at least 5 minutes before use. Use the mixture within the specified pot life.
- Apply Bona SuperSport Pure HD with the paint roller below (11 mm fur). Roll crosswise with a fluid and smooth motion, avoiding product build-up. Consumption is approx. 100-120 g/m2. If a second application is required, it should be done between 2 and a maximum of 12 hours after the previous coat. After this period of time (> 12 hours), intermediate sanding with the Maroon pad is necessary. Then clean the surface by vacuuming and wiping with a damp cloth. The curing process takes about 3 days (90% cured in 24 hours, 100% after 72 hours). Do not place mats until the paint has completely cured. The floor can be walked on after 24 hours, but remains subject to scratches and damage until the coating has completely hardened. Do not wet clean during the first week, dry clean only.
If the previous coating layer has been allowed to dry for more than 24 hours, intermediate sanding with (see below the Maroon pad) is always required.