Woca Master Filler Aqua 5 liters,

Master Filler Aqua is a thick, easy-to-sand water-based filler for joints, holes and cracks in wooden parquet floors in, for example, brick or herringbone patterns. The joint sealant gives a uniform finish, is extremely easy to work with and will not crack because it is elastic and moves with the wood.

Content is 5 liters.

• Easy to sand once hardened
• On waterbase
• Thick elastic consistency
• Neutral odor
• Drying time 60 min.
• Consumption 15-20 m2 per liter.
• Apply with the stainless steel spatula below

Use Woca Master Filler Aqua,

It is important that both the wood and the filler are at least 15°C (preferably approx. 20°C) with a
average humidity of about 50%. Make sure the room is well ventilated
optimal evaporation and drying time. The surface must be completely clean, dry and free from dirt,
wax, grease, polish, etc. Dirt and irregularities should be removed with a sander
deleted. If necessary, clean the surface with WOCA Intensive Wood Cleaner, diluted 1:20,
before sanding.
Don't forget to test the product for suitability by first rubbing a small piece of wood with the
to process wood filler.

Fine sanding Grit 60-80

Treat with Woca Master Filler Aqua,

Shake product well before use. Mix Master Filler Aqua and the sanding residue into a nice and
soft paste. The structure of the filler can be adjusted using the fine or coarse
sanding residues. Spread the filler evenly, using a stainless steel applicator.
Remove as much excess filler material as possible before it begins to harden. Repeat the process
for larger joints, holes and cracks, if necessary. Sand the surface with sandpaper
with grit 100-120, as soon as the surface is dry. The surface can then be varnished with a
of WOCA lacquers, according to the product instructions.

--TECHNICAL INFORMATION...