Bona Pure (Lacquer for PVC) 5 liters

Bona Pure is a hard-elastic and wear-resistant PUR coating for the treatment of elastic floors. It serves as long-term protection for floors in high-traffic commercial and industrial areas – restoring the floor's appearance and simplifying routine maintenance. Bona Pure has a water-based, clear, non-yellowing formula. Available in Mat and in Extra Mat.

Advantages,

1. Shake the can thoroughly and pour the material into a mixing bucket.
2. Slowly add a bottle of Bona Pure Hardener into the bucket while mixing by machine. Mix the mixture thoroughly for at least 1 minute. Note: The hardener should not be added directly into the Bona Pure can. Only external mixing is possible. When mixing smaller quantities, make sure that the correct ratio between Bona Pure and Harder is maintained. Allow the mixture to react for at least 5 minutes before use. Use the mixture within the specified pot life.
3. Apply Bona Pure with the special lacquer roller below (11 mm fur). Roll crosswise with a fluid and smooth motion, avoiding product build-up.
   Consumption is approx. 100-120 g/m². If a second application is required, it should be done between 2 and a maximum of 12 hours after the previous coat. After this period of time (> 12 hours), intermediate sanding with the Maroon pad system below is necessary. Then clean the surface by vacuuming and wiping with a damp cloth. Suitable fans can be used to speed up the drying process.

If the previous coating layer has been allowed to dry for more than 24 hours, intermediate sanding with (see below the Maroon pad) is always required.