Bona Mix&Fill (Joint Kit)
| Article number: | 10476 |
| EAN: | 4005094350013 |
- Mo/Fr ordered before 18.00 is shipped directly
- Laagste prijs tot wel 75% korting !
- Houtafwerkingsspecialisten sinds 1976
- Grootste voorraad van de Benelux (+1000m2)
- Reeds 200.000+ tevreden klanten
- Customer service from 10:00 to 18:00
Bona Mix&Fill (Joint Kit)
Mix&Fill from Bona is a water-based joint sealant for parquet that must be mixed with sanding dust. This parquet joint kit is suitable for all types of wood.
Suitable for all types of wood, except (sometimes) merbau. The product is mixed with the sanding dust of the floor to be treated so that a natural color is created that matches the rest of the floor.
Characteristics,
• Rust-resistant; does not discolor the wood due to, for example, steel nails
• Easy to spatula
• Takes color from the wood
• Practically odorless
• Not a fire hazard
• High filling capacity
• Quick drying
• Easy to sand
• EC1 Plus certified = extremely low emissions
Preparation,
The surface must be clean, dry and free from grease, polish, dust, wax and other contaminants.
Shake well before use. Mix Bona Mix & Fill with either 80 grit sanding dust from the edge sander or 120 grit from the belt sander. Note: the sanding dust must not be contaminated with wax, paint or varnish residues.
User manual Bona Mix & Fill,
Bona Mix & Fill is used after sanding, to be formed into a yoghurt-thin paste together with fine sanding dust and to be filled with a stainless steel spatula in all holes and joints to make the parquet floor smoother and more beautiful.
Treat larger joints in which the paste sinks several times.
NB Process prepared mixture immediately. After approximately 20-30 minutes, sand the entire parquet floor with grit 100/120 to obtain a beautiful, even floor, equal in color and structure.
Use Bona Mix & Fill only in combination with a Bona lacquer or Bona oil/wax product.
S 2 Keep out of the reach of children
S 29 Do not throw waste into the sink
Note: Bona Mix & Fill meets the requirements of the new OPS legislation.
Drying time: approximately 20-30 minutes at 20°C and 60% RH at joints of 1 mm, with deeper or wider joints the drying time is extended
Shelf life: at least 1 year after production date in unopened original packaging, keep frost-free
Binder : acrylic dispersion
Solvent : water
Transport/storage : the temperature must not be lower than +5°C and higher than +25°C
Packaging : 1 liter bottles (10 x 1 bottle per box - 50 boxes on a pallet)
5 liter cans (3 x 5 cans per box - 44 boxes on a pallet)
