Bona Linoprime (primer for PVC) content 5 liters
Article number: | 14667 |
EAN: | 7312790400629 |
- Mo/Fr ordered before 18.00 is shipped directly
- Laagste prijs tot wel 75% korting !
- Houtafwerkingsspecialisten sinds 1976
- Grootste voorraad van de Benelux (+1000m2)
- Reeds 200.000+ tevreden klanten
Bona Linoprime (primer for PVC) content 5 liters,
Bona LinoPrime is a two-component, water-based, polyurethane-based primer for filling the pores of deeply cleaned and sanded linoleum floors. Improves the flow and layer build-up of the next coating, which can usually be applied after only one hour.
Advantages,
• Fills pores and reduces absorbency
• Ultra fast drying
• Low consumption per m²
• Essential for linoleum
• EC1R Plus certified
Instructions:
- Shake the Bona LinoPrime thoroughly in the can and pour the material into a mixing bucket.
- Slowly add a bottle of Bona Pure Hardener into the bucket while mixing by machine. Mix the mixture thoroughly for at least 1 minute. Note: Hardener should not be added directly into the Bona LinoPrime can. Only external mixing is possible. When mixing smaller quantities, make sure that the correct ratio between Bona LinoPrime and Bona Pure Hardener is maintained. Let the mixture react for at least 5 minutes before use and use the mixture within the indicated pot-life (3 hours).
- Apply Bona LinoPrime with the Microfiber Paint Roller (5 mm coat) below. Roll crosswise with a fluid and smooth motion, avoiding product build-up. Consumption is approx. 20-25 m²/litre.
Subsequent application of Bona Pure lacquer must be carried out between 1 and a maximum of 24 hours after the previous coat. After this period of time (> 24 hours), intermediate sanding with the Maroon pad is necessary and strongly recommended. Then clean the surface by vacuuming and wiping with a damp cloth. Suitable fans can be used to speed up the drying process.